LAVOR WASH AC20 2.0kW Portable Industrial Air Conditioner
The AC20 2.0kW Portable Industrial Air Conditioner is the smallest unit in the Lavor range of portable air conditioners but can still pack a punch. This makes it the perfect unit to be used where a small to medium area needs to be cooled or a specific equipment which needs to be kept at a cool temperature.
NOTE: These are Industrial Spot Cooling Refrigerated Air Conditioners.
-
Flexible & Detachable Air Vent Pipe
-
Cleanses & Dehumidifies Air
-
Removable / Washable Filter
-
Portable Unit with Wheel Locks
-
Condensation Water Container
-
Refrigerant Refill/Top Up Portal
-
Cooling Area – 5-10m2
-
Refrigerant Type – R410A
-
Refrigerant Charge – 330 grams
-
Noise Level – 55dB
-
Temperature Operating Parameters – 18C – 45C
Related products
-
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 450W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 220-240V 50/60Hz 450W 10amp plug
- Operating Current: 2.1A
- Max. Air Flow: 12,000 m3 per hour
- Noise Level: <70dB(A)
- Speed Control: 3-speed
- Effective Cooling Area: 60-80m2
- Water Consumption; 8-10 Litres per hour
- Water Tank Capacity: 60 Litres
- Dimension: 1430(H) x 900(W) x 560(D)
- Nett Weight: 45kg
- Gross Weight 49kg
NOTE: FREIGHT RATES MAY APPLY!
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner 4.5kW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1032T is the medium unit in size and capacity in the TradeQuip “Made for the Trade” series of portable air conditioners. The 1032T has a small foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C output air for spot cooling at a work station which will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1032T runs on a 240V/15A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 15A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 4.5KW / 15300Btu
- Power Unit: 240V 50Hz 15amp plug
- Rated Power: 2000W
- Rated Current: 9.0A
- Max. Air Flow: 800m3 per hour
- Coverage Area: 35-40m2
- Noise Level: 60dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 200mm Dia
- Condensation Tank Capacity: 8 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1035(H) x 520(W) x 480(D)
- Nett Weight: 70kg
- Carton 1of2: 1110 x 610 x 570mm
- Carton 2of2: 370 x 350 x 260mm
- Gross Weight 78kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Portable Industrial Spot Cooling Air Conditioner – 2.7KW
TradeQuip “Made for the Trade” Portable Industrial Air Conditioners are designed for economical spot cooling in workshops, service rooms, warehouses and offices especially where other electrical equipment creates a heat load. These TradeQuip Portable Industrial Air Conditioners are completely self-contained and housed within an insulated cabinet. The unit’s exterior is constructed of galvanised steel and protected with a tough powder-coated, polyester finish. All models are equipped standard with heavy-duty castors for easy portability. TradeQuip Portable Industrial Air Conditioners bring in air from an outside source to cool its condenser, cycling hot air to an outside source. This provides a fresh cool air room temperature with high efficiency. Just wheel it in, plug it in and it goes to work immediately, giving high cooling capacity to wherever and at whatever point you require it.
With its compact size, this TradeQuip “Made for the Trade” Portable Industrial Air Conditioning unit is perfectly suited to spot cool work areas, yet still delivers an impressive amount of cooling air output.
The 1031T is the smallest unit in size and capacity in the TradeQuip “Made for the Trade” series portable air conditioners. The 1031T has an extremely small foot print that is ideal for spot cooling people or equipment in a high ambient environment, like in a workshop or office space. The TradeQuip “Made for the Trade” Portable Air Conditioners offer a quick cooling solution with “plug and play” technology that tops the competition with its small size, strong air flow, and easy installation. These portable air conditioners achieve up to 10°C temperature differential across its coil. This means that 39°C input air will instantly produce 29°C. output air for spot cooling a work station the unit will effectively cool a person and/or workshop equipment within 2-5m of the unit instantly.
The 1031T runs on a standard 240V/10A circuit with automatic restart after a power failure. The unit comes with a 5-Litre self-contained condensation tank, that is manually emptied. Installation takes less than ten minutes for easy set up.
With the substantial ‘instant’ changes in the air temperature, a portable industrial air conditioner is perfect for cooling hard working people or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Features
- Compact yet powerful
- Runs on 240V 10A circuit
- Wide operating range of 18º- 45ºC
- Single duct system for easy installation
- 5 Litre self-contained condensation tank for easy removal and emptying
- Capillary tube construction for simplicity
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- Durable and long lasting steel construction
- Heavy duty locking castors and handles for easy manoeuvrability
Specifications
- Cooling Capacity: 2.7KW / 9200Btu
- Power Unit: 240V 50Hz 10amp plug
- Rated Power: 950W
- Rated Current: 4.2A
- Max. Air Flow: 400m3 per hour
- Coverage Area: 12-15m2
- Noise Level: 55dB(A)
- Operating Temperature: 18° – 45°C
- Suction Pressure: 2.5Mpa (Max.)
- Discharge Pressure: 4.5Mpa (Max.)
- Speed Control: 2-speed
- Cooling Pipe: 120mm Dia
- Exhaust Pipe: 160mm Dia
- Condensation Tank Capacity: 5 Litres
- Castor Wheels: 75mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 855(H) x 430(W) x 405(D)
- Nett Weight: 42kg
- Carton: 965 x 515 x 484mm
- Gross Weight 47kg
Intended use:
This appliance is intended for air conditioning industrial or trade workshop/office environments. It is not suitable for any other purpose (such as drying clothes, cooling food, etc.)
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler Cover
This TradeQuip Protective Cover keeps TradeQuip Portable Evaporative Coolers clean, protected and dust-free when not in use. This economical and effective cover is made from durable black fabric. The low-profile design is compatible with TradeQuip 1027T, 1028T and 1035T models.
- Water-resistant fabric
- Lightweight and breathable
- UV treated
- Easy to use
Intended Use:
To protect 1027T and 1035T TradeQuip Portable Evaporative Coolers when not in use.
About the TradeQuip brand
The ‘TradeQuip’ brand of workshop equipment, is designed for use in a demanding workshop environment by professional users. With proven and trusted “Made for the Trade” reliability, ‘TradeQuip’ branded products offer the very best in performance for an affordable price. All backed by a 1year trade guarantee across 1,000+ distributors Australia wide.
(0 reviews)