PEWAG PLZW-DW DW15
- Can be screwed directly onto an anchor rod
- Standard DW15 anchor rods can be used
- Standard hexagon with spanner size 27
- Additional crimp at the upper end of the nut (lock nut)
- Serial number makes it easier to document the necessary inspection
- peTAG optionally available
SKU: PLZW-DW
Categories: Lifting & Lashing Points, Lifting Point
Related products
-
G80 Chain & Fitting
SUNNY LIFTING G80 Concrete Panel Lifter
-
Concrete panel lifter used for pre-cast concrete panel lifting conforms to AS3850.
-
Contains sufficient aluminium to protect from strain age embrittlement during service.
-
100% magnaflux crack detection and individually proof tested at 2.5 times WLL.
-
Batch minimum break tested at 5 times WLL.
-
Sampling fatigue tested at 1.5 times WLL for 20000 Cycles.
-
Each unit has an unique trackable serial number.
-
Surface finishing: Yellow powder coated.
-
Test certificate available upon request.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Eye Bolts & Eye Nuts
AUSTLIFT Swivel Lifting Point Long Thread Yoke
- Rotates through 360° and pivot 90°.
- Manufactured from alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN1677-1.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are Metric thread (ASME / ANSI B18.3.1M).
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 1.5 times the WLL.
- Meets or exceeds all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chain & Lifting Fittings
AUSTLIFT Gearbox/Engine Lifting Bolt on Brackets
Design
- Low carbon alloy material.
- Large eye size for utilized applications.
- Link brackets require less clearance than a standard eye bolts and makes placement/ alignment much faster and easier.
- Marked with product ID, grade, working load limit and manufacture ID.
Testing
- Proof tested at 2 x WLL as per AS3776.
- Destructive tested at 4 x WLL.
- Must be used with grade 8.8 bolts or higher.
- Testing certificates available upon request.
Applications
Designed for use with engine load levellers and a variety lifting slings.
Angled brackets bolt directly to component being lifted.- Perfect for engines
- Transmissions
- Swing Gears and Bearings
- Radiators and more
Brackets accept Metric and Imperial diameter bolts.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Lifting & Lashing Points
PEWAG PLKW Kappa
- Weld-on anchor point with two welding blocks. This allows the forces to be better transferred to the substructure.
- Simple, patented system to ensure the correct distance between the blocks and the ring.
- Optimised working load limits for PLKW 7t and PLKW 32,5t
(0 reviews)







