SYKES PICKAVANT Refractometer
- This multi-purpose tool tests coolant, battery acid, AdBlue and screen wash using an optical prism test technique
- Features internal light for use in poor light conditions
- Coolant – tests both propylene and ethylene based anti-freeze coolant solutions and determines the freezing point
- Battery acid – indicates the specific gravity of the battery electrolyte
- AdBlue – indicates % concentration of AdBlue additive
- Screen wash – shows the freezing point of screenwash fluids
- Freezing point shown in ºC
ATTRIBUTES
| AdBlue | 30 m- 35% |
|---|---|
| Battery | 1.1 to 1.4 kg/ltr |
| Coolant | 0 to -50ºC |
| Windscreen | 0 to -40ºC |
Related products
-
Electrical System TestersSP TOOLS Electrical System Tester – Multimeter, Power Probe & Oscilloscope
DESIGNED TO TEST THE ELECTRICAL SYSTEMS OF 12 & 24V AUTOMOTIVE VEHICLES
Fast and convenient, this generation of intelligent electrical system tester is equipped with a large LCD colour display screen it is designed to fault find all 12 and 24 volt vehicles. It allows you to activate electrical components, test their function, follow and locate bad earths or shorts. Measure DC voltage, Pulsed DC, Current, frequency and duty cycle, perform fuel injection tests and view the wave form display, check the continuity, diodes, confirm polarity, test and operate relays all in a self-protected test unit that is simple and easy to operate.
FEATURES
- Tests all 9V to 30V vehicle electrical systems
- Intelligent identification of voltage & resistance
- Interchangeable probe and 1m extension cord for difficult to reach areas
- Powered by 12 or 24V vehicle battery
- Oscilloscope function for single circuit testing
- Multimeter mode (measure voltage, resistance & diode)
- Dual top-mounted LED work lights
- Back lit 2.4” LCD display
- Multiple language settings
- Built-in speaker for warnings & alerts
SPECIFICATIONS
- Working voltage DC: Min 9V – Max 30V
- Working temperature: 0 – 60˚C (32 – 140˚F)
- Storage temperature: -40 – 70˚C (-40 – 158˚F)
- Power supply: 12V or 24V DC (Vehicle Battery)
- Max measuring voltage: 100 Volts
- Min measuring voltage: 0.1 of a Volt
- Resistance measuring Ω: 1.0 ohm ~ 200K ohm
- Current measuring range: 0 ~ 18 Amps
- Max continuous current: 18 Amps
- TFT true color LED display: 2.4”inches (320×240 DPI)
INCLUDES
- Electrical system tester
- 5m power cable & 1m probe extension cable
- Alligator clips
- Needle point test probe
- Automotive test probe (1mm diameter flattened tip)
- Auxiliary grounding clip
(0 reviews) -
ElectricalSYKES PICKAVANT Inteliprobe 6-24 Volt Tester
- The Inteliprobe is an intelligent circuit and continuity tester ideal for locating bad earths, breaks in continuity and short circuits. Simply hook up the battery clips to the vehicle battery and the tool is ready for use. Suitable for 6V – 24V electrical systems, which makes it ideal for motorcycles, cars, boats and trucks
- Polarity Test – LED changes colour to indicate the polarity on the probe pin Red = positive, Green = negative
- Continuity Test – between the probe pin and the auxiliary croc clip lead. Test wires and components that are disconnected from vehicles electrical system. When continuity is present LED illuminates green
- Short Circuit Protection – a thermal breaker which can be manually reset, will trip out at 8 Amps providing protection to the vehicles wiring system
- On-vehicle Component Tests – pushing the switch forward causes a positive potential on the probe tip, and pushing the switch backwards causes a negative potential on the probe tip. This enables the user to energise components such as lights, locks, and trailer connections without having to remove them from the vehicle
- Off-vehicle Component Tests- by using the green lead as ground connection, energising the probe tip will enable the user to check the component
(0 reviews)
