MILWAUKEE 180mm (7″) STEELHEAD™ Metal Diamond Cut-Off Blade
STEELHEAD™ Metal Diamond Cut-Off Blades use premium grade synthetic diamonds, bonded directly to the steel core through a vacuum brazing treatment to provide maximum strength. Available in 125mm – 355mm, the STEELHEAD™ Blades are uniquely designed to cut metal materials and for dry use.
Related products
-
Diamond Saw BladesBORDO Diamond Saw Blades Hard Brick & Masonry
- 350mm Segmented Diamond Hard Brick Blade
- Hard brick and masonry.
- 10mm segmented rim for fast cutting with enhanced blade/substrate interface cooling for long blade life.
- Optimally designed for cutting cured concrete and stone.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Use when cutting bluestone, hard clay brick, fire brick, cured concrete, concrete block, concrete brick, granite, marble, wall chasing in hard brick & concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews) -
Diamond Saw BladesOX Trade XL Continuous Diamond Blade
Built with the tradesman in mind, the OX Trade XL Continuous Diamond Blade for Ceramic Tiles exemplifies precision and reliability, featuring a continuous rim blade crafted specifically for cutting ceramic tiles. Its 10mm continuous rim ensures consistent and smooth cutting, allowing for precise and accurate results without chipping or damaging the tiles. Tailored for efficiency, this blade maintains steady and continuous contact with the tiles, ensuring clean cuts and minimising the risk of breakage during the cutting process. Ideal for professionals in the tiling industry, this diamond blade by OX guarantees durability, efficiency, and precise performance, offering a reliable solution for achieving flawless and high-quality cuts on ceramic tiles, thereby streamlining the tiling process with consistent and exceptional results.
- Continuous rim blade for cutting ceramic tiles
- 10mm continuous rim
- Bore Size: 22.2mm/20mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Cutting BladesMILWAUKEE 230mm (9″) STEELHEAD™ Metal Diamond Cut-Off Blade
STEELHEAD™ Metal Diamond Cut-Off Blades use premium grade synthetic diamonds, bonded directly to the steel core through a vacuum brazing treatment to provide maximum strength. Available in 125mm – 355mm, the STEELHEAD™ Blades are uniquely designed to cut metal materials and for dry use.
(0 reviews) -
Diamond Cutting BladesMILWAUKEE 125mm (5″) STEELHEAD™ Metal Diamond Cut-Off Blade
STEELHEAD™ Metal Diamond Cut-Off Blades use premium grade synthetic diamonds, bonded directly to the steel core through a vacuum brazing treatment to provide maximum strength. Available in 125mm – 355mm, the STEELHEAD™ Blades are uniquely designed to cut metal materials and for dry use.
(0 reviews)