[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

ITM Holemaker Pipe Attachment Single Chain

Features

Adapt your Holemaker machine to use on pipe. Can be used on any ferrousand non-ferrous materials.
Suit Pipe 80mm To 250mm.
Maximum Base Dimensions: 95 x 204mm

Out of stock

SKU: SAPA-1 Categories: ,

Related products

  • Magnetic Base Drilling Machines

    ITM Holemaker Air 200 Pneumatic Magnetic Base Drill

    Features

    The PRO200A is a new pneumatic portable magnetic drilling machine with 200mm diameter drilling and M52 tapping capacity.
    The spindle bore is No.5 Morse Taper and the drill chuck is 1-1/4″ Weldon. The PRO200A is a robust design built with modular construction and can be handled by a single operator.

    Features:.
    2 speeds – ideal for drilling and tapping.
    Integrated air processing module.
    2 x 14700Nm magnetic adhesion force.
    Adaptive magnets, can work on curved or flat surfaces.
    Integrated swarf guard.
    Reverse.

    Both the machine and the body of the PRO200A drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

    Specifications

    The PRO200A is a new pneumatic portable magnetic drilling machine with 200mm diameter drilling and M52 tapping capacity.
    The spindle bore is No.5 Morse Taper and the drill chuck is 1-1/4″ Weldon. The PRO200A is a robust design built with modular construction and can be handled by a single operator.

    Features:.
    2 speeds – ideal for drilling and tapping.
    Integrated air processing module.
    2 x 14700Nm magnetic adhesion force.
    Adaptive magnets, can work on curved or flat surfaces.
    Integrated swarf guard.
    Reverse.

    Both the machine and the body of the PRO200A drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

    (0 reviews)
    Add to Quote
  • Magnetic Base Drilling Machines

    ITM Holemaker Air 35 Fully Atex 11 Certified, Pneumatic Magnetic Base Angle Drill

    The HMP35AD is a small portable pneumatic drilling machine which allows holes to be drilled up to 35mm diameter in places with restricted space, using standard 3/4″ Weldon Shank cutters. This machine is the lowest height pneumatic magnetic drill currently available on the world market. The combination of pneumatic drive and permanent magnetic base eliminate the need for electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry.
    *12mm twist drill capacity using Weldon Shank twist drill bits.

    Both the machine and the body of the HMP35AD-ATEX drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.

    Specifications

    Capacity ( Diameter ): 35mm
    Capacity ( Depth ): 25mm
    Motor: 800 Watt pneumatic, 1400L/min
    Weight: 17.0kg
    Height: 183mm Constant Working Height
    Stroke: 39mm
    Magnetic Dead Lift: 6500Nm On 25mm Steel Plate
    Through Spindle Coolant System
    Supplied In Metal Carry Case With Cutter Guard & Safety Strap
    (0 reviews)
    Add to Quote
  • Magnetic Base Drill Accessories

    ITM Morse Taper Arbors

    These arbors are designed to adapt conventional machines eg. drill presses, lathes, milling machines and others to accept Holemaker annular cutters. This becomes a very economical alternative to normal methods of drilling or boring large diameter or deep holes. By adding an extension arbor and long series annular cutter to your industrial arbor, you can achieve depths of up to 320mm in hollow section steel. Time savings in excess of 40% over normal drilling methods are not unusual.

    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Magnetic Base Drilling Machines

    ITM Holemaker Pro 110 Magnetic Base Drill
    The Holemaker PRO 110 is an extra heavy duty, large capacity machine capable of producing burr-free holes up to 110mm diameter by 110mm depth.
    1650w motor with 4-speed mechanical gearbox produces superb torque through gear reduction in low speeds. No. 4 Morse Taper spindle bore for usewith taper shank drills, tapping head (M30 Capacity) and taper shank reamers.

    Supplied complete with side mounted coolant system and arbor for use with 3/4″ shank Holemaker cutters up to 75mm diameter and 75mm depth of cut. Optional arbor to take 1-1/4″ shank cutters up to 110mm diameter and 110mm depth. 1100ml pressure feed coolant bottle available, recommended for use with large diameter and depth hole drilling.

    Specifications

    Capacity ( Diameter ): 110mm
    Capacity ( Depth ): 110mm
    Capacity ( Twist Drill ): #4 Morse Taper 47mm
    Motor Power: 1650 watt
    Input Power: 1800 watt Single Phase 240V
    Gearbox: 4 Speed Heavy Duty Mechanical Gearbox (85 / 135 / 160 / 250rpm)
    Weight: 31.0kg
    Magnetic Dead Lift: 22000Nm On 25mm Steel Plate
    Stroke: 214mm
    Height: 566mm min / 780mm max
    Through Spindle Coolant System
    Smart Magnet Technology To Ensure Sufficient Magnetic Adhesion
    Supplied In Metal Carry Case With Cutter Guard & Safety Strap
    (0 reviews)
    Add to Quote