Complete setup to adapt your Holemaker machine to use twist drill bits.
| Drill Chucks | 19MM DRILL CHUCK & 3MT ARBOR, TO SUIT HMPRO75, HMSPECIAL80 & HMSPECIAL110, 19MM DRILL CHUCK & 4MT ARBOR, TO SUIT HMPRO110 & HMSPECIAL140, 13MM DRILL CHUCK & 2MT ARBOR, TO SUIT HMPRO50, HMSPECIAL60 & HMP45, 13MM DRILL CHUCK & ADAPTOR, 13MM CAP, TO SUIT HMPRO40, 13MM DRILL CHUCK & ADAPTOR, INCLUDES SADCA AND DC11506-1 |
|---|
Both the machine and the body of the HMP45-ATEX drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.
The HMP35AD is a small portable pneumatic drilling machine which allows holes to be drilled up to 35mm diameter in places with restricted space, using standard 3/4″ Weldon Shank cutters. This machine is the lowest height pneumatic magnetic drill currently available on the world market. The combination of pneumatic drive and permanent magnetic base eliminate the need for electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry.
*12mm twist drill capacity using Weldon Shank twist drill bits.
Both the machine and the body of the HMP35AD-ATEX drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion.
A pilot pin serves three main purposes:.
Ejects the slug at the end of the cut.
Provides coolant feed into the centre of the cutter.
Locates the centre of the cut