ITM Grimax Pipe Notcher, 3.6Kw, 415V, 3PH, Capacity 17-100mm Pipe 0-60 Degree
Features
High Quality Robust Machine Made In Denmark, Smooth & efficient metal grinding & notching. 5 year motor warranty.
Smooth, low vibration high output operation.
Notches pipe & tubing between 30 & 90° angles.
Platen grinding surface.
Specifications
Motor: 3.6KW 3Phase 415V
Flat Surface: 605 x 150mm
Grinding Belt: 2250 x 150mm
Vice: 30° – 90° Swivel Vice
Pipe O.D Capacity: 17 – 100mm
Weight: 140KG
Flat Surface: 605 x 150mm
Grinding Belt: 2250 x 150mm
Vice: 30° – 90° Swivel Vice
Pipe O.D Capacity: 17 – 100mm
Weight: 140KG
Out of stock
Related products
-
Grinding MachinesITM Multitool Belt and Disc Grinding Attachment 1220x100mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 4″ wide (1220 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 484 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1 HP.
- Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
- NOTE: This is an attachment only.
(0 reviews) -
Grinding MachinesITM Industrial 10″ Bench Grinder, 415V 3PH, 250 x 38mm Wheels
Features
High Quality robust construction, made in Taiwan, designed to give long service life in demanding industrial workplaces.
All machines include adjustable eye shields and grinding wheels.
High powered motor rated at it’s true output power.
Fully balanced motor providing smooth operation.
Capacitor start and run provides instant startup and running power.
Available with Non Voltage Return (NVR) safety switch, which stops machine from re-starting during workshop power failuresSpecifications
Wheel Diameter: 250mm (10″)
Wheel Width: 38mm
Bore: 25.4mm
Motor Power: 1.3HP (1.0kW)
Voltage: 415V
Speed: 2850rpm
Weight: 43Kgs
Thread Size: 1″ – 8TPI BSW
Switch: Standard(0 reviews) -
Grinding MachinesITM Industrial 8″ Bench Grinder NVR Switch 3 Phase 750W
Features
High Quality robust construction, made in Taiwan, designed to give long service life in demanding industrial workplaces.
All machines include adjustable eye shields and grinding wheels.
High powered motor rated at its true output power.
Fully balanced motor providing smooth operation.
Capacitor start and run provides instant startup and running power.
Available with Non Voltage Return (NVR) safety switch, which stops machine from re-starting during workshop power failuresSpecifications
Wheel Diameter: 200mm (8)
Wheel Width: 25mm
Bore: 15.9mm
Motor Power: 1HP (0.75kW)
Voltage: 415V
Speed: 2850rpm
Weight: 18.5Kgs
Thread Size: 5/8 BSW
Switch: NVR Switch(0 reviews) -
Grinding MachinesITM Stand to Suit ITM 12″ Bench Grinder
Features
- Top plates to suit up to 12″ bench grinders
- Very strong & sturdy design
- Large base plate with multiple mounting holes
- Large water parts bin
*Bench grinder and accessories not included.
Specifications
Height: 805mm(0 reviews)